TaylorMade R5 Dual D Drivers
TaylorMade R5 Dual D Drivers
[Oct 17, 2007]
mark64506
Shoots in the 90s
Model Reviewed:
Taylormade R5 Draw D
Purchased at local Sports Authority for $150. Right to the range and loved it. As I practiced and played more (swing adjustments) I could regularly launch the ball 240-260 in the air. Great drives on the sweet spot would clear 320. Finally after 5 months with the club I had the swing down. Last round on the 18th tee, I told my partners that I was going to swing so hard....I may actually miss the ball....The winds and fairway were all open game for a 350 yarder. I swung away........At top of the downswing.....CRACK! Shaft split in half! Customer Service Took the club back to retailer. Taylormade said they do not cover "mis-use" I had purchased additional "coverage" from 3rd party at purchase time.....They said it was Taylormades' problem...Got lucky with the manager at Sports Authority and he offered cash back or store credit....Last time I buy Taylormade equipment...You can get the same result for less prices. Even though I did not mis-use the club...I loved it...They flat out refuse the shaft could break like it did....F taylormade..... Similar Products Used: Cleveland hibore....callaway 460/big bertha.... |
[Sep 06, 2007]
Murph79
Shoots in the 80s
Model Reviewed:
Taylormade R5 Dual Type D
At first I thought this club was great. I've always tended to have a fade with my driver, and miss-hits have usually end up slicing into the next fairway. The R5 Dual D seemed to straighted out that fade or at least tone it down, but miss-hits still ended up slicing like any other driver. The problem I found with this club was that I could never tell whether or not the ball was going to draw. Sometimes it draws, sometimes it's straight, and sometimes it fades. With a narrow fairway, that doesn't leave much room for error. I think this club is best suited for golfers who tend to slice the ball all the time. For those who just tend to hit a true fade, the risk of drawing the ball - or even hooking it O.B. is just too risky. But for the price you can get these for used, I reccomend anyone who slices the ball to give this club a serious consideration. Customer Service I've had to use Taylormade before for other clubs, and they are kind of slow. Similar Products Used: Taylormade Buner, Taylormade R580, Nike Sasquach Sumo, Taylormade R7 Superquad - and lots of others |
[Sep 01, 2007]
bad putt
Shoots in the 80s
Model Reviewed:
R5 Dual Draw 10.5 stiff
I have owned this model for a year. When I first bought it I was struggling to fight a slice. To be honest it did help me and I stopped slicing the ball apart from the odd one.
Customer Service Not used Similar Products Used: Cobra SZ440 / Wilson Fat shaft |
[Aug 20, 2007]
stroken oak
Shoots in the 80s
Model Reviewed:
Taylor Made R-5 D
Fell in love with the look and feel of the R-5. Stiff stock shaft. 10.5 loft with the draw bias. All the bias crap is a gimmick in my opinion. Get a nuetral or squared driver and learn how to grip the sucker so you can determine your own bias. I thought the club might actually help my small fade and in fact it kinda did. I now ballon shots 250 yds dead straight no roll instead of hitting 275-280 yd fades. I currently use an Adams 460 RPM 9 degree that doesn't balloon. I haven't had a ballooning problem until this latest driver.
|
[Aug 03, 2007]
Brian
Shoots in the 80s
Model Reviewed:
R5
I recently bought this driver from Sports Authority for $150. I looked at the new Burner and the R7, but the 460's just look so huge at address that I found it distracting. This club seemed like a nice compromise to my old Burner bubble and the massive 460's. I immediately took it to the range to see how I would perform with this new driver. It went pretty well. It's by no means a cure-all, if you slice the ball it will slice, if you draw the ball it will draw, however, those slices and draws may not be so errant or exaggerated. This is what I found, I can still slice it, miss hit, or draw, but the ramifications aren't nearly as detrimental to my score. Instead of slicing off into the woods or water, I'm just in the rough stuff, or on the edge of the fairway. My first round with the club and I managed to shave a few strokes just by not being in too much trouble and having to take a drop or make a "safe" shot.
Similar Products Used: Burner Bubble
|
[Aug 02, 2007]
chea
Shoots in the 80s
Model Reviewed:
taylormade r5 dual type d
i bought this driver on sale for 150 it was a great deal before i was slicing way right im 13 so i cant hit as far as other adults but i hit this driver consistently straight 230 to 270 yards i hit at least 5 fairways now in a 9 hole round i hit it kind of high so i dont get much roll but i like this driver |
[Jul 17, 2007]
T-Bone
Shoots in the 90s
Model Reviewed:
R5 Dual
Worst Taylor Made driver I have ever hit. I was looking for a 540 XD after they were disco'd and was turned on to this by the clerk at Golf Discount. This is no 540 XD. The R5 10.5 Regular Flex tip soft had an extremely high ball flight. I was constantly ballooning it. Finally gave up.
Customer Service Didn't use. Similar Products Used: All of them. |
[Jul 06, 2007]
Chris
Shoots in the 90s
Model Reviewed:
R5 Dual D
I recently acquired this driver to replace my old Adams GT 363. Wow... what a difference! The R5 Dual D has really helped turn my slice into a straight shot, and I'm now driving more more consistently and also much longer! I believe a lot of that is due to this driver being more forgiving on mis-hits, but it's a world of difference from my old club. A smooth, steady tempo swing will launch the ball straight down the fairway and long on every hit... as long as I do my part! Customer Service N/A. Similar Products Used: Adams GT 363 |
[May 17, 2007]
Dale Kenzle
Shoots in the 80s
Model Reviewed:
Taylor Made R5 Type D w/ stock R shaft
I really like this driver. Definitely helps a person with a fade or weak slice. I have a weak slice that I could never fix. This club did it for me without having to change the mechanics of my swing (which is the hardest thing to do when you've been playing for several years) The club also gives you more distance because I'm hitting straight. I definitely recommend this club to any slicers out there. People who hit draws should definitely stay away from this club. They should opt for the Type N (neutral). Similar Products Used: Mizuno MP-001 (400cc)
|
[Jan 30, 2007]
mcalllstarrr13
Shoots in the 70s
Model Reviewed:
Taylormade R5 Dual Type Draw, Stock Shaft Stiff Flex
Wow! This driver has it all! Distance, Accuracy and Workability! I was a little apprenhensive about buying the Draw Offset driver but it was money well spent. I can't believe how quickly I adapted to this driver after using an old Callaway Big Bertha 2, 380cc driver for so long. I took this driver to the course and well, didn't hit it to well. I am a person that has the natural tendancy to swing the club way over the top. The first hole I hit a 260+ drive (which is short for me) but with a 20+ yard hook. But, after taking it to the rangen I am crushing it! I have fixed my swing over this offseason and now I am taking the club on an inside swing path. As a result I am hitting either a straight drive or a big hook when I need it. The driving range I go to has a net about 100ft high around 250+ to carry it. With this driver I am clearing that fence by massive amounts. I am only 14, but I can hit the long ball. I am looking forward to taking this driver deep down the middle every time.
Customer Service None Needed
Similar Products Used: Callaway Big Bertha 2 |